|
A nickel-chromium alloy with good oxidation resistance at higher temperatures. With good resistance in carburizing and chloride containing environments. Our inconel is non-magnetic, has excellent mechanical properties and a combination of high strength and good workability and is readily weldable. inconel products are available in inconel form of pipes,tubes,sheets,plates,coils,forged fittings,buttweld fittings,flanges,fasteners,bars and rods etc. Grades as under:- Inconel 600 (UNS No. N06600) Inconel 600® heat and corrosion. Inconel 600® also has high strength and can be easily formed. Inconel 600® can be hardened and strengthened only by cold work. Inconel 600® can be used in the heat-treating industry for muffles, furnace components, and for heat-treating baskets and trays. Inconel 601 (UNS No. N06601) Inconel 601® is a standard engineering material and has a great resistance to heat and corrosion. Inconel 601® also has high strength and good workability. Inconel 601® can be hardened and strengthened only by cold work. Inconel 601® can be used in the heat-treating industry for muffles, furnace components, and for heat-treating baskets and trays. Inconel 617 (UNS No. NO6617) Inconel 617® consists of nickel-chromium-cobalt and – molybdenum. These elements make Inconel 617® highly resistant to oxidation and carburization. Inconel 617® can be easily fabricated; it can be hot formed up to 2200º F, and cold formed at 1900º F. Inconel 617® has excellent weldability. Inconel 617® is used for ducting, transition liners in both aircraft and land based gas turbines, and combustion cans. Inconel 625 (UNS No. N06625) Inconel® 625 is a nonmagnetic, corrosion and oxidation resistant, nickel-base alloy. It has high strength and toughness in the temperature range cryogenic to 2000°F (1093°C) which is derived largely from the solid solution effects of the refractory metals, columbium and molybdenum, in a nickel-chromium matrix. Inconel 718 (UNS No. NO7718) Inconel 800 (UNS No. N08800) Inconel 825 (UNS No. N08825) |
|
Inconel Pipes |
|
We offer Inconel Pipes with following specifications and range:
|
Inconel Flanges |
|
We offer a wide range of Inconel Flanges for typical industrial applications:- Form: slip on flanges, socket weld flanges, blind flanges, lapped flanges, screwed flanges, weld neck flanges, reducing flanges, spectacle flanges, slip on boss flanges, plate flanges, plate blank flanges, screwed boss flanges. Range : ½” (15 nb) to 48” (1200nb) in 150 lbs, 300 lbs, 600 lbs, 900 lbs, 1500 lbs, 2500 Standard : ASTM BS Din Is Grades: inconel 800 (uns no. N08800) inconel 825 (uns no. N08825) inconel 600 (uns no. N06600) inconel 625 (uns no. N06625) inconel 601 (uns no. N06601) |
Inconel Tubes |
|
We offer Inconel Tubes as per the following specifications:-
|
Inconel Fasteners |
|
We offer wide range of Inconel Fasteners as per the following specifications:- Form: Bolts stud bolts, hex head bolts, socket hexagon head screw anchor bolts, u-bolts, j bolts, mushroom head square neck bolts , t- head bolts , wing screw , eye bolt , eye bolt, foundation bolts, structural bolts. Washer plain washer , plain big & small od washer , spring lock washer , spring washer heavy duty , tooth washer , star washer , tab washer with one & two tab . Nuts hexagon nuts , hexagon coupling nuts , hexagon thin nut , square nut , hexagon castle nuts , self locking nut , hexagon domed cap nuts. Screw pan head slotted screws , cheese head slotted screws , countersunk head slotted screws , countersunk raised head slotted screws , pan phillipse head screw , countersunk phillipse raised head screws , slotted cheese trim head machine screws , socket head allen cap screws , allen countersunk socket head cap screws , socket head shoulder screws , socket head cap screw low head , hexagon socket set screw with flat point , hexagon socket set scews with cone point , hexagon socket set screw with dog point , hexagon socket set screws with dog point , hexagon socket set screws with cup point , imprial socket cap screws . other threaded rod, as per drawing and customers spec. coating hot dipped galvanizing phosphate teflon xylon zinc cadmium test certificate manufacturer test certificate as per en 10204 / 3. 1b grades:- uns 8825 (inconel 825) uns 6600 (inconel 600) uns 6601 (inconel 601) uns 6625 (inconel 625) |
Inconel Sheets and Plate |
|
Inconel Sheets, Plates and Coils are used in applications like structural, mechanical & general engineering purposes. They are designed to withstand tremendous amount of weights and pressure. Our plates, sheets and coils are testimonials of our quality standards. Our range consists of sheets, plates & coils chequered plates, steel chequered Plates and more. Range : 0.5 mm To 200 mm thick in 1000 mm TO 2500 mm width & 2500 mm to 12500 mm Length available with NACE MR 01-75. Grades:- UNS 8800 (INCONEL 800) UNS 8825 (INCONEL 825) UNS 6600 (INCONEL 600) UNS 6601 (INCONEL 601) UNS 6625 (INCONEL 625) |
Inconel Rods / Bars |
|
Inconel rods have an excellent mechanical properties and provide good resistance to oxidation. These pipes find extensive application in furnace muffles, electronic components, heat treating equipment, steam generator tubing, heat exchangers, etc. Inconel Rods/Bar
|
Inconel Fittings |
|
Inconel fittings are available as per following forms and grades:
|
|
Business Enquiry Form  |
|
|
|
